Utility Engineers

Basic Product Specifications

• 2.2, 4 & 5.5 kW power sizes

• 400/3/50 electrics

• All units are 7 or 10 bar(g) rated

• Start/Stop pressure switch control

• Starter

- 2.2 DOL

- 4 kW DOL

- 5.5 kW Star/Delta

• All units 200L receiver mounted

Sound levels as low as 64dB(A)

• Ingersoll Rand manufactured airend

• Ultra Coolant

• 46ºC ambient temperature

• Dryer option

Dryer Specifications

• ND72IN refrigeration dryer

• Manufactured in Ingersoll Rand, India

• Full feature control panel

• 50ºC ambient temperature

• Same footprint of non-dryer model

• Own power supply (230/1/50)

Reduced Noise Levels vs Reciprocating Unit

• Lower vibration levels

• Enclosed silenced unit

• Panels lined with noise reducing foam

• Rotary as low as 64dB(A) vs recip 80+dB(A)

Results in:

• Compressor located closer to point of use

• Less disruption to workforce

• Reduced risk of breaking Health & Safety regulations

• More productive & safer working environment

Integrated Airend/Separation Unit

Includes

• Airend connected directly to separator tank

• Common manifold

- MPV Minimum Pressure Valve

- Thermostatic valve

- Oil filter

- Separator element

• Intake valve and blowdown arrangement

• HATS High Air Temperature Switch

Advantages: Minimal joints and leak paths

Package is clean and free from pipes, etc.

Space reduction

Proven design

Airend

Summary

• Ingersoll Rand manufactured

• Proven design

• Been in production since 2005

• Over 5,000 units in the field

• 2009 YTD zero failures

• Profile 4/6 lobes

Main Motor

Highlights

• Sizes 2.2, 4 & 5.5 kW

• Voltage 400v (±10%)

• IP55

• ‘F’ class insulation

• S1 duty (continuous duty)

• Motor service factor 1.15

• Proven in the field

Drive & Belt Tension

Basic Details

• Easy motor positioning

• One motor support for all range

• Precise transmission ratio

• Accurate belt alignment

• Minimum new parts

• Reduced noise & vibration

Overview

• 46ºC ambient temperature

• Oil Cooler

• Pack of cooler with shroud and 400V fan

• Common parts

- same hose for oil in/oil out

- connections

• Serviceability

• 2.5 litres of coolant

Routine Service & Maintenance Easy to Perform

• Quick access through easily removeable panels

- spin on oil filter (A)

- separator element (B)

- coolant level check (C)

- coolant top up or change (D)

- quick change air filter (E)

• Rear panel access

- belt

- motor

Value Proposition

• Low initial price

• Low sound level

• Easy to maintain

• Minimal footprint

• Competitive flow/performance

• Evolution - Ingersoll Rand brand

Additional Information:

• Production Capacity: 150 units per month
• Delivery Time: ready stock
• Packaging Details: sea worthy packing

Basic Product Specifications
• 2.2, 4 & 5.5 kW power sizes
• 400/3/50 electrics
• All units are 7 or 10 bar(g) rated
• Start/Stop pressure switch control
• Starter
- 2.2 DOL
- 4 kW DOL
- 5.5 kW Star/Delta
• All units 200L receiver mounted
Sound levels as low as 64dB(A)
• Ingersoll Rand manufactured airend
• Ultra Coolant
• 46ºC ambient temperature
• Dryer option
Dryer Specifications
• ND72IN refrigeration dryer
• Manufactured in Ingersoll Rand, India
• Full feature control panel
• 50ºC ambient temperature
• Same footprint of non-dryer model
• Own power supply (230/1/50)
Reduced Noise Levels vs Reciprocating Unit
• Lower vibration levels
• Enclosed silenced unit
• Panels lined with noise reducing foam
• Rotary as low as 64dB(A) vs recip 80+dB(A)
Results in:
• Compressor located closer to point of use
• Less disruption to workforce
• Reduced risk of breaking Health & Safety regulations
• More productive & safer working environment
Integrated Airend/Separation Unit
Includes
• Airend connected directly to separator tank
• Common manifold
- MPV Minimum Pressure Valve
- Thermostatic valve
- Oil filter
- Separator element
• Intake valve and blowdown arrangement
• HATS High Air Temperature Switch
Advantages: Minimal joints and leak paths
Package is clean and free from pipes, etc.
Space reduction
Proven design
 
Airend
Summary
• Ingersoll Rand manufactured
• Proven design
• Been in production since 2005
• Over 5,000 units in the field
• 2009 YTD zero failures
• Profile 4/6 lobes
 
Main Motor
Highlights
• Sizes 2.2, 4 & 5.5 kW
• Voltage 400v (±10%)
• IP55
• ‘F’ class insulation
• S1 duty (continuous duty)
• Motor service factor 1.15
• Proven in the field
Drive & Belt Tension
Basic Details
• Easy motor positioning
• One motor support for all range
• Precise transmission ratio
• Accurate belt alignment
• Minimum new parts
• Reduced noise & vibration
Overview
• 46ºC ambient temperature
• Oil Cooler
• Pack of cooler with shroud and 400V fan
• Common parts
- same hose for oil in/oil out
- connections
• Serviceability
• 2.5 litres of coolant
Routine Service & Maintenance Easy to Perform
• Quick access through easily removeable panels
- spin on oil filter (A)
- separator element (B)
- coolant level check (C)
- coolant top up or change (D)
- quick change air filter (E)
• Rear panel access
- belt
- motor
Value Proposition
• Low initial price
• Low sound level
• Easy to maintain
• Minimal footprint
• Competitive flow/performance
• Evolution - Ingersoll Rand brand, Evolution ^TM, a brand of Ingersoll Rand, come with a commitment to stand behind the customer in all aspect what it does. We bring peace of mind that allows our customers to focus on their primary objective, moving their business forward. Thus, it continues to advance in compressed air technology and services to maximize reliability, efficiency and productivity for our customers.    

Additional Information:

• Item Code: N4-10-200
• Production Capacity: 150 Sets
• Delivery Time: ready stock
• Packaging Details: Seaworthy packing

Basic Product Specifications
• 2.2, 4 & 5.5 kW power sizes
• 400/3/50 electrics
• All units are 7 or 10 bar(g) rated
• Start/Stop pressure switch control
• Starter
- 2.2 DOL
- 4 kW DOL
- 5.5 kW Star/Delta
• All units 200L receiver mounted
Sound levels as low as 64dB(A)
• Ingersoll Rand manufactured airend
• Ultra Coolant
• 46ºC ambient temperature
• Dryer option
Dryer Specifications
• ND72IN refrigeration dryer
• Manufactured in Ingersoll Rand, India
• Full feature control panel
• 50ºC ambient temperature
• Same footprint of non-dryer model
• Own power supply (230/1/50)
Reduced Noise Levels vs Reciprocating Unit
• Lower vibration levels
• Enclosed silenced unit
• Panels lined with noise reducing foam
• Rotary as low as 64dB(A) vs recip 80+dB(A)
Results in:
• Compressor located closer to point of use
• Less disruption to workforce
• Reduced risk of breaking Health & Safety regulations
• More productive & safer working environment
Integrated Airend/Separation Unit
Includes
• Airend connected directly to separator tank
• Common manifold
- MPV Minimum Pressure Valve
- Thermostatic valve
- Oil filter
- Separator element
• Intake valve and blowdown arrangement
• HATS High Air Temperature Switch
Advantages: Minimal joints and leak paths
Package is clean and free from pipes, etc.
Space reduction
Proven design
 
Airend
Summary
• Ingersoll Rand manufactured
• Proven design
• Been in production since 2005
• Over 5,000 units in the field
• 2009 YTD zero failures
• Profile 4/6 lobes
 
Main Motor
Highlights
• Sizes 2.2, 4 & 5.5 kW
• Voltage 400v (±10%)
• IP55
• ‘F’ class insulation
• S1 duty (continuous duty)
• Motor service factor 1.15
• Proven in the field
Drive & Belt Tension
Basic Details
• Easy motor positioning
• One motor support for all range
• Precise transmission ratio
• Accurate belt alignment
• Minimum new parts
• Reduced noise & vibration
Overview
• 46ºC ambient temperature
• Oil Cooler
• Pack of cooler with shroud and 400V fan
• Common parts
- same hose for oil in/oil out
- connections
• Serviceability
• 2.5 litres of coolant
Routine Service & Maintenance Easy to Perform
• Quick access through easily removeable panels
- spin on oil filter (A)
- separator element (B)
- coolant level check (C)
- coolant top up or change (D)
- quick change air filter (E)
• Rear panel access
- belt
- motor
Value Proposition
• Low initial price
• Low sound level
• Easy to maintain
• Minimal footprint
• Competitive flow/performance
• Evolution - Ingersoll Rand brand, Evolution is a brand developed for the Indian market and by our India team at our plant in Naroda. Based on customer feedback, these air compressors have been designed for tropical Indian conditions and will ensure the best level of performance and reliability that customers come to expect of Ingersoll Rand. The Evolution business directly supports our strategy to grow in emerging markets. It is the result of innovation and creating productive manufacturing environments for our customers in India.

Additional Information:

• Item Code: N2-10-200
• Production Capacity: 150 sets per month
• Delivery Time: Ready stock
• Packaging Details: We pack our products strictly with standard seaworthy case.

Description :

Standard Evolution compressor base mount plated

- Air-cooled design with 46 degrees C ambient continuous-duty rating

- IP55, IEC frame, 400v +/- 10% /3ph/50hz TEFC motor IE3 efficiency

- Integral star delta starter

- Air Cooled aftercooler

- On-Line/Off-line control with automatic start & stop

-MicroProcessor based panel

Additional Information:

• Item Code: 84148090
• Production Capacity: 100 units per month
• Delivery Time: ready stock
• Packaging Details: sea worthy packing

FEATURES OF INGERSOLL-RAND AIR COMPRESSOR

Continuous Duty -This design criterion, ensures our compressors provide pulsation free air 24 hours a day, operating on a 100% duty cycle.

Low Sound level test conditions -This design criteria meets the stringent OSHA requirements and offers flexibility with respect to location of the compressor.

Simplicity -This design criterion ensures simple hook-ups, offering savings in time and money at the time of installation.

Advanced air end design

Bearings- Our Air Ends use back to back Tapered Roller Bearings on the discharge end and Cylindrical Roller Bearings on the inlet end. These bearings provide line contact, distributing load equally over a larger surface area. This design criteria, has a significant impact on the life of the Air End.

Coolant Dam -Exclusive bearing coolant dam traps coolant upon compressor shutdown, assuring:

No dry starts even momentarily

Coolant circulation within 12 RPM

Prolonged life out of the bearings

An ambient of 115 Deg F (46 Deg C).

This design criteria, apart from ensuring temperatures at the discharge of the compressor is at an optimum Level, also

Eliminates unscheduled shutdowns particularly during hot summers

Reduces cooler fouling.

Enhances the life of separator elements

Enhances life of components in the air end.

Multistage air separation:  The multistage separation system is a truly unique and innovative design.

The position of the baffle opening located in the separation sump tank performs the first stage of separation by creating a vortex flow thereby the heavier particles of oil drop down due to a change in direction.

The baffle located in the separation sump tank performs next stage of mechanical separation by impingement action.

A separator element located above another baffle which, creates a dry sump, further reduces oil carry over, when air -oil mix passes through this element.

This effective mode of air oil separation ensures oil carry over down stream is limited to 1 to 3 ppm in our compressors.

Integral high efficiency coolers

The After cooler cools the compressed air to within 10 Deg C of the ambient temperature. The integral design of the oil and air cooler ensures efficient heat transfer.

Leak free hydraulic type fittings.

The free air delivery indicated by us is ratings of the full package and is in accordance with CAGI-Pneurop acceptance test standard ISO 1217.

ELECTRICALS FOR THE COMPRESSOR

Squirrel Cage Induction Motor specially manufactured for Ingersoll-Rand are designed to operate continuously at the compressors applied power, and is rated for 46 Deg C ambient with matching insulation.

VFD Starter cum Motor Over Load Relay.         

Advantages available to you using our patented synthetic based coolant are:

It has high level of compatibility with compressor parts, downstream instruments, processes, hoses, diaphragms and most plastics commonly used in pneumatic instruments.

Lubricant change will be at a much longer interval thereby decreasing maintenance down time.

Longer life from air oil separator elements, oil filters and bearings.

7.5-11kw Oil-Flooded, Rotary Screw Compressors

NE-T Series

7.5-11 KW Offering

NE7T Come in pressure rating of 7,8 and 10 barg, Can be offered in three versions,

a. Base plate mounted

b. 272 liter Tank mounted

c. 272 liter Tank mounted TAS version.

7.5 kw with DOL starter

Compressor Relay Based, Dryer Microprocessor

Advantages : 1. 65% moisture removal in Air receiver. 2. Less Load on dryer giving better dew point. 3. Air entering dryer at less temperature giving better dew point 4. Constant load on dryer as connected before air receiver. 5. Pre filter ensures better reliability of dryer. 6. All above results in better quality of air delivered.

NE-T Series at a glance

Reliability Time-proven Aired Integrated type airend resulting in less leakages with less connections and Pipes.  Efficiency More Flow per kW Optimized Specific Power over the operating range Productivity Extended Service Intervals & Rationalized Consumables Easy Access Serviceable Items & Cleaning Single Inlet and Exhaust for Ease of Ducting Single point maintenance and monitoring of the complete air system  Serviceability Convenient solutions that are easy to install, operate and maintain and minimize total cost of ownership